《法国达索公司CATIA官方国际认证》模拟考题B

CATIA Certified Professional Exams

Sample Questions

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

Objective of the document

This document is meant to give you an idea of what our exams look like.

Questions are multiple choices with single answer. They may include images.

The types of questions you will find below is similar in all exams, but the

proportion may vary depending on the level of the exam. Expert exams include

more context-based and problem solving questions than the Specialist ones.

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

1. Which one of these menu or short cut will exit CATIA?

A. Start and Exit

B. File and Quit

C. Crtl + G

D. Crtl + X

E. File and Close

2. Of the following items which will rename an object?

A. Double-click its name in the specification tree

B. Edit the object’s definition

C. Use the Rename option in the contextual menu

D. Edit the object’s properties

E. Overwrite its name in the specification tree

3. What is this tool used for?

A. To calculate and display mean dimensions

B. To fix or lock all the part dimensions

C. To display all the numerical tolerances

D. To define numerical tolerances on dimensions

E. To remove all the numerical constraints

1

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

4. Which tool is used to get information on the threads and taps that have been

created on a part?

A.

B.

C.

D.

E.

2

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

5. What would be the result of a draft angle with the following parameters?

A. B.

C. D.

3

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

6. Using the part above, what would be the result of the following pocket operation?

A. B.

C. D.

4

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

7. Using the sketch profile above, which tool is activated to propagate the offset as

shown?

A.

B.

C.

D.

E.

5

Dassault Systèmes - CATIA Certified Professional exams - Sample Questions

8. When constraining a profile element, what does the default color of purple signify?

A. Being projected from 3D

B. Needing to be updated

C. Published for sharing

D. Currently being selected

E. Being over constrained

9. What are the conditions to be able to re-limit a loft ?

A. The plane normal to the spine defined at the relimitation point must

intersect the guide(s) and the point(s) resulting from this intersection

must belong to the section

B. The point(s) resulting from this intersection must belong to the

section

C. The plane parallel to the spine defined at the relimitation point must

intersect the guide(s) and the point(s) resulting from this intersection

must belong to the section

D. The plane normal to the spine defined at the relimitation point must

intersect the guide

10. Which of the following tools will Split a curve or a surface?

A. B. C.

D. E.

6

本文来源：https://www.2haoxitong.net/k/doc/59f8c4fa5dbfc77da26925c52cc58bd631869302.html