This exercise describes how to construct a project containing several controllers, including the library handling.
After this exercise you will be able to:
∙ Describe how to construct a project containing several controllers.
∙ Describe the advantages/drawbacks of dividing an application between several controllers.
∙ Describe the strategy of libraries
∙ Apply the tools for creation of a structured project.
In the Online Help: Contents tab, …..
☞ Open the project StructuredProj.
1. Insert Application_2 from the project Counter_MMS.
2. Insert Controller_2 from the project Counter_MMS.
3. Application_2 should run in Controller_2 and
Application_1 in Controller_1.
Ask your teacher for correct system identities and
IP addresses and apply them to the Controllers.
4. Download the Applications to the Controllers guided by your teacher.
……………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………
5. Insert Application_2 from the project Counter_MMS.
6. Insert Controller_2 from the project Counter_MMS.
7. Application_2 should run in Controller_2 and
Application_1 in Controller_1.
Ask your teacher for correct system identities and
IP addresses and apply them to the Controllers.
8. Download the Applications to the Controllers guided by your teacher.
9. Notice that there is no communication between the controllers yet.
10. If you open Program2 in Controller_2, you will find a variable counter that is increased every scan.
Du kan tag bort denna osynliga text men låt
nedanstående Page Break ligga kvar !
Låt även den efterföljande sidan ligga kvar !
This page is intentionally left blank
本文来源:https://www.2haoxitong.net/k/doc/ca9ba80ceff9aef8941e06b3.html
文档为doc格式