JTM-4M Colloid Mill
Colloid mill of this type is a crushing and grinding device with high technology and multi-functions, it is mainly used for mixing and grinding rubber asphalt and modified asphalt.
Its structure:
The grinding chamber of JJTM-4M colloid mill is designed with multi-functional and diversified technology that is a unique 0fFLECK VIP, which truly makes fluid into a high-speed mixing, from high shear to crushing grinding area and finally reached the highest realm with conical homogenization. These multiple process and designated position can be made at one time. The stator of JTM - 4 m type colloid mill has cooling heat preservation jacket.Choosing stainless steel with high quality in the part of machine that will contact materials, choosing high quality materials to make stators for they have good wear resistance and acid resistance and some other advantages.
Asphalt colloid mill OF FLECK JTM - 4 M type adopted advanced technology in the world. the stator regulating operation is very simple, as long as when starting the colloid mill, the adjusted plate in import be manually operated back 1-2 circles, the distance between the rotor and stator will be 1-3 mm.Meanwhile,it will eliminate the adhesion between the rotor and stator to avoid reducing the energy consumption of start up when the temperature of device becomes higher. when the motor starts at normal speed, the device will adjust the distance of stator adjusted plate forward to ensure that the particles in fluid can be crushed and ground in a best condition. In order to ensure that materials be crushed at one time and be smashed with cycle process can achieve the same quality and yield, FLECK company has made a unique structure in manufacturing the stator tooth space into a adjustable pitch with stepless, the grinding gap in crushing fluid particles is a little big at the first time, and then the distance can be narrowed according to actual condition to ensure the stator output and fineness.
main principles:
The main functions for JTM-4M colloid mill is to crush and mix those materials with solid particles in the form of spiral materials.Then materials are delivered into coarse crushing zone for crushing big particles. In the effect of the centrifugal force, big particles are pushed out of the groove and the stator to be cut, smashed and mixed.As the clearance of arc grinding area becomes smaller, pitch becomes shorter, having double mechanical teeth and shear rate keeps increasing, particles in fluid are crushed under high speed into fine grinding area. Because FLECK JTM-4M colloid mill-----the advanced device in the industrial, is made with excellent design concept to install the homogenization knife with cone on the outside parts of the colloid mill to get a better emulsification effect.
features:
(1)It has strong functions of mixing, cutting, grinding and homogenizing materials.
(2) It can smash, grind and emulsify all kinds of materials.
(3) It has cooling heat preservation jacket.
(4)The distance can be adjusted about 0.01-3mm to decrease the load of staring-up for energy saving.
(5)Fixed grinding material can choose 38CrMoAl 2205 to make nitriding treatment or permeability tungsten carbide.
Data
本文来源：https://www.2haoxitong.net/k/doc/aebc86406d85ec3a87c24028915f804d2b16878a.html
文档为doc格式