Use 10 M Ohms if there is no shunt resistance (probe rNormally, the voltage across the plug pins must be less 62.79V peak one second after being disconnfrom the supply. Industrial twist lock cthe same limit, but ten seconds after disconnection from Leakage Current and Capacitance Discharge Calculator for X capsThe selection of an AC line filter influences how a piece of equipment will perform during product safety tests. Spdischarge is an issue of the X capacitance of the filter. Leakage current is primarily a function of the Y capacitance. Enter the value capacitors and Y capacitors implemented in the line filter you are considering to get an idea of how the filter will perfom during a saCommon limits are .75mA for ungrouand 3.5mA for grounded equipment.With these values the results of your safety tests will look approximately like those shown below.
本文来源：https://www.2haoxitong.net/k/doc/e641db0102020740be1e9b61.html
